Your roof
Every roof face with its pitch and direction, from the AHN height measurements and the BAG buildings. If your house has a shared roof, only the part above your own plot counts.
Work out solar panels and a home battery
Look up your address. For each roof face we work out how many solar panels fit and what they yield per year, with the shade of neighbours and trees. And which home battery suits it: a fixed one, a plug-in battery or none, also with the panels you already have.
Already have a project?
No project yet. Look up an address above to start.
0panels
0kWp
0kWh a year
0%of your usage
less sunmore sun
Model of the house
0 kWh a year
Until the end of 2026 you can offset what you feed back against what you take from the grid (net metering). From 2027 you can't: then the power you use yourself is worth the most.
From 2027 net metering ends. A battery stores the daytime sun for the evening. We calculate every size up to 20 kWh and see what's left each year if you pay the battery off over 15 years.
Without the car feeding back With the car feeding back
Above the line the battery pays for itself; the dot is the best size.
You plug it into a socket yourself, no installer needed. It may give the house at most 800 W, so it gets less out of the sun than a fixed battery. We work it out with the price on Knibble over 10 years.
No plug-in battery from Knibble pays for itself here within 10 years.
The prices come from Knibble. If you buy through these links, we get a fee. All plug-in batteries on Knibble
Generation Usage
Tap a month for a typical day in that month.
| Month | Generation, kWh | Usage, kWh | Used yourself, kWh |
|---|
More than one project?
For free you can save one project. With the Business subscription you save unlimited projects, for example for your clients.
Every roof face with its pitch and direction, from the AHN height measurements and the BAG buildings. If your house has a shared roof, only the part above your own plot counts.
How much sun falls, measured by the KNMI at the weather station nearest you, averaged over twenty years. Per month, and per hour split into direct sun and light from the whole sky.
At dozens of points per roof face we check every hour whether the sun can reach them, past the houses and trees nearby. Deciduous trees let more light through in winter.
By default panels of 430 Wp and 1.7 by 1.1 m; you can also pick 400, 460 or 500 Wp, each with its own size, and mix them. If there are panels already, pick the older ones, from 75 Wp from around 2000: they lose about 0.5% a year. Not right against the edge of the roof. On a flat roof in rows tilted to the south. About 80% of what they catch ends up as power.
Per hour what you use yourself, what you feed back and what you buy. With that we work out every home battery up to 20 kWh, also with a car that gives power back, and every plug-in battery on Knibble, and see which pays for itself best without net metering.
It's a good estimate, not a quote. Every year is different: a sunny year gives more, a grey year less. An installer also looks at your fuse box, chimney, roof windows and the strength of the roof.
The shape of the roof comes from measurements from above. We sometimes miss small things like a roof window or chimney. In that case expect a few fewer panels.
The power of all panels together in full sun. In the Netherlands each kWp on a good roof yields about 900 to 1,000 kWh a year.
First on every spot that catches at least 70% of what a south-facing roof at 35° without shade gets. A pitched roof that clearly faces north is left out at first; you can restore it below the list, and the bin icon removes a roof face from the list, for example a shed that doesn't count. With Pick a roof you tap a roof face in 3D and see it large. Tap a spot on the roof to place or remove a panel, or use − and + next to a roof face: they remove the worst panel or add one on the best free spot. On a pitched roof you can choose portrait or landscape. With Adjust you see a roof face large: there you drag panels where you want them and see right away what that does to the yield. On a flat roof we also account for the shade the rows cast on each other: put them closer together and more fit, but each panel catches less.
Enter your usage, and whether you have or want an electric car, a heat pump or a home battery. For every hour of a typical day in each month we work out how much power you use straight away and what goes to the grid. Heating follows how cold it is in your area, measured by the KNMI. It's still an estimate: every house and every year is different.
From 2027 net metering ends: what you feed back then earns little, and what you buy in the evening costs the full price. In the Battery tab we work out every size from 1 to 20 kWh with your panels and your use, and look at what it saves per year minus what it costs over 15 years. You fill in the prices of power, feeding back and the battery yourself. We also work out the plug-in batteries you plug into a socket yourself, with their price on Knibble. At the top you see which is the best value. Sometimes no battery is best.
At the top of the Roof tab, pick the panels you have under Panels already in place: from 75 Wp from around 2000 to 370 Wp from around 2022, with the size of the time. A panel loses about 0.5% of its power a year; we take that into account. Place them with − and + or in Adjust as they really are, then check in Battery which battery suits them.
An address is a project, with a name, a note, your usage and as many designs as you want to try, for example south only versus east and west too. With Compare you see them side by side. With Save the project is stored in your account, so you can see it again on any device, and after that it saves itself. All you need is your email address: you'll get a code by email. Everything is free; for free you save one project, with the Business subscription unlimited. With Share you share the link, and with Print you get the design on paper or as a PDF, with the roof from above.
Everything also works for free, with one project. With the Business subscription you save unlimited projects, for example one per client, each with its designs and note. You can cancel any time.
Then the roof usually belongs to the owners' association. In that case we calculate with the whole roof of the building.
From open data: the AHN height measurements, the BAG buildings, the Kadaster plots, the trees from the AHN and the sun from the KNMI. All sources are on doornl.nl/bronnen.